10 inch submersible deep well water pumps are suitable to be used in well diameter of 250 mm. They use oil filled submersible motor to keep pump working in reliable and safe situation. Cast iron type and stainless steel type can be chosen. As best 10 inch submersible deep well water pumps manufacturer, we produced many types of models and specifications with various head and flow capacity. 10 inch submersible borehole pumps price are also different. Detailed information will be introduced by our personnel if you need.
Working Parameter：
Flow Capacity: 46-214m³/h;
Head Range: 17-430m;
Motor Power: 5.5kw-110kw
Voltage: 380v/420v/660v/1140v or As per request
Frequency: 3 phase 50hz/60hz
Material: Cast iron or Stainless steel
Applications
10 inch submersible deep well water pumps are widely used for industrial water supply and drainage, agricultural farmland irrigation, domestic underground water pumping and construction water supply and drainage.
Using Condition
- PH level of water among 6.5-8.5
- Minimum water flow through motor should be 16cm/s
- Maximum operating times: 20
- Maximum temperature: 35℃
- Wire length: 4.0m
Features:
- Low working noisy and environmental friendly
- Impact and good-looking appearance, easy to be installed and maintained
- Safety and reliable working condition
- Good mechanical sealing
- Long service life and energy saving
- High flow and high head, wide using range
- Environmental friendly
10 Inch Submersible Deep Well Water Pumps For Sale
10 inch borehole submersible pumps for sale in APK include different types. Each of them have their own price. Compared with other 10 inch submersible borewell pumps manufacturers, we constantly promote our producing technology to satisfy customers’ needs. We stick to regard customers as working center and improve our service system as well as experience from customers point of view. Since foundation, APK only produce high quality 10 inch submersible borehole pumps and we will be your most reliable suppliers.
10 Inch Submersible Deep Well Water Pumps Classification
10 inch submersible water well pumps in APK are divided into two type according to their casting. One is cast iron 10 inch submersible pumps, while the other is stainless steel 10 inch submersible pumps. Cast iron submersible pumps are famous for their wear resistance and hardness. Then stainless steel types are famous for their corrosive resistance and water quality protection. Besides, 10 inch submersible borehole pumps can be also classified according to their motor power. Two kinds of motors are normally used. One is water filled motor and the other is oil filled motor. High and low head and flow capacity also make contribution to this aspect. Each division of models are used for better applying to specific using situation. If you have puzzle on choosing, our personnel will be on your help.
10 Inch Submersible Deep Well Water Pumps Price
As sorts of models and specifications are produced, cost of 10 inch submersible borewell pumps are sure to various accordingly. Among many other submersible pump manufacturers, APK is famous for its competitive price. We have our own factory with strong strength and high producing technology, therefore, our products are designed and produced all by ourselves. No middle disparity exists, so our price of 10 inch submersible deep well pumps are quite low and cost-effective. Besides, our pumps have longer service life than others. So Maintenance and repairing cost is largely reduced.
10 Inch Submersible Deep Well Water Pumps Quality
Apart from high quality materials we use, such as 304 stainless steel materials. We have the most modern producing technology. Our personnel will constantly monitor performance of our pumps after it being produced and combine with customers’ feedback, we will perfect our pumps step by step. All our pumps are designed through thousands of experiments to ensure their safety working. When our pumps are produced, we have professional testing machine to have them test one by one. Therefore, our 10 inch submersible pumps seldom have quality problem. If any, defective will be corrected as soon as possible and our personnel will help solve all using inquiry.
10 Inch Submersible Deep Well Water Pumps Working Process
1.Pumps being put underwater, and clean water should be added into pumps before working
2.When pump is operating, pump motor starts working accordingly
3.Water or other medium is pumped in, and flow into impeller part
4.Highly rotating impeller brings water rotates together
5.Water is thrown out of impeller part and flows out to destination
6.Vacuum part is formed at the entrance of inlet, new round of pumping starts again
10 Inch Deep Well Submersible Pump Installation
- 10 inch “NEMA” standard flange
- Level of protection device: IP58
- Level of insolation: CLASS F Level
- Maximum submerge depth: 120m
Want to know more details?
10 Inch Submersible Deep Well Water Pumps Manufacturer
Many types of submersible 10 inch pumps manufacturers can be chosen by customers when buying pumps. APK, as best 10 inch submersible pumps supplier, promise to have the most cost-effective price compared with others. We make constantly innovation as our working motto, use credibility and integrity to touch our customers. Besides, we have intimate after sale service and complete and legal warranty system to protect your rights. APK will always be your best choice. As many kinds of 10 inch submersible deep well water pumps for sale now, our personnel will help you choose the most suitable one for you. So if you have intention on our products or our company, please leave your message below, and we will contact you as soon as possible!
